Panel & Gate Accessories

 While all Hi-Hog gates come with a chain and latch, a variety of alternative gate latches can be purchased separately or custom installed on your gate order.

Horseback Drop-Latch	Horseback Lever-Latch	Plunger Latch
Model Bolt Size Item # Weight Medium 7/8" 1334 14 lbs Heavy 1 1/8" 1333 20 lbs	Model Fits Gate Bolt Size Item # Weight Medium Handy 7/8" 1321 10 lbs Medium Corral 7/8" 1322 10 lbs Medium Heavy Duty 4' 7/8" 1323 10 lbs Medium Heavy Duty 5' 7/8" 1324 10 lbs Medium Round Pen 7/8" 1325 10 lbs Heavy Corral 1 1/8" 1326 14 lbs Heavy Heavy Duty 4' 1 1/8" 1327 14 lbs Heavy Heavy Duty 5' 1 1/8" 1328 14 lbs Heavy Bison 1 1/8" 1329 14 lbs	Model Bolt Size Item # Weight Medium 7/8" 1331 4 lbs Heavy 1 1/8" 1330 6 lbs
The Drop-Latch is designed for horseback operation	The Lever-Latch is designed for horseback operation	The ideal latch for frequently used gates or for gates that need to be closed in a hurry.
A 4' long rod slides through tubing welded to the end of the gate at a 45 degree angle. This latch uses gravity and requires the operator to lift the latch both for opening and closing the gate.	This Latch employs the same plunger latch described to the right except that the handle has been repositioned to operate as a lever. Simply lift the handle and push towards the plunger to release the latch. To close the gate just push the gate shut and it will lock automatically.	The Spring loaded plunger compresses when it comes in contact with the sloped face of the striker slot to provide a safe and solid lock. Use the 7/8" model on handy gates and corral gates and the 1 1/8" on heavy duty gates.

Hi-Hog offers two styles of gate latch striker plates which will work with any of the latches described above.

 

Weld-On Striker Plate	Bolt-On Striker Plate
Model Style Slot Width Item # Weight Weld-On Medium 1" 1648 2 lb Weld-On Heavy 1 1/2" 1650 2 lb This Plate is designed to be welded onto the face of a steel post. Adjust plunger latch so that bolt makes maximum penetration.	Model Style Slot Width Item # Weight Bolt-On Medium 1" 1649 2 lb Bolt-On Heavy 1 1/2" 1651 2 lb This Plate comes with 4 pre-drilled 7/16th" holes. Adjust plunger latch so that bolt makes maximum penetration

All Hi-Hog Panels, and Frame & Gates come with our universal connectors which free you to combine them with any other Hi-Hog Panels, Overhead Spreaders, or Frame & Gates. These connectors can be stacked to create a rigid 3-way connection. Overhead spreaders come with aa three way connector. All connectors will combine with all Hi-Hog products requiring connectors.

Connector Links

Post-to-Panel Connector

Size Item # Weight 1 1/2" x 3 1/2" x 3/16" 1112 0.5 lb This versatile and economical connector has largely replaced the need for our three or four-way connectors. They offer tremendous flexibility on uneven ground. Simply lift the pin on the panel connector and slide it back throught one of the holes in the connector link, and put the connector pin on the additional panel through the other hole. Two links are required for each connection.

Model Item # Weight Vertical 1110 0.8 lb Horizontal 1111 0.8 lb The Post-to Panel Connector is designed to bolt to a post.

3-Way Connector	4-Way Connector
Height Outside Dia. Gauge Item # Weight 5' 1.5" 16 ga. 1090 7 lb 6' 1.9" 14 ga. 1091 8 lb This Connector can be used anywhere three items intersect. Tubing is coned to eliminate sharp edges. ( see also connector links)	Height Outside Dia. Gauge Item # Weight 5' 1.5" 16 ga. 1100 7.5 lb 6' 1.9" 14 ga. 1101 8.5 lb This Connector can be used anywhere four items intersect. Tubing is coned to eliminate sharp edges. (see also Connector Links)